How to Program Your Anytone AT-5555 V6 CB/HAM Radio with Software 22
How to Program Your Anytone AT-5555 V6 CB/HAM Radio with Software 22
If you are looking for a versatile and powerful CB/HAM radio, you may want to consider the Anytone AT-5555 V6. This radio has many features and options that can be customized using the programming software 22. In this article, we will show you how to download and install the software, and how to use it to program your radio.
Downloading and Installing the Software
The programming software 22 for the Anytone AT-5555 V6 is available on the official website of Anytone[^2^]. You can find it under the Download section, along with other software and manuals for different models of Anytone radios. The file name is ARES_II_Setup_1.01.zip. You will need to unzip it and run the setup.exe file to install it on your Windows computer.
anytone at-5555 v6 software 22
Alternatively, you can also use the CHIRP programming software[^1^], which is compatible with many radios from different brands. CHIRP is an open-source software that can run on Windows, Mac OS X, and Linux. You can download it from the CHIRP website[^1^] and follow the installation instructions for your operating system.
Connecting Your Radio to Your Computer
To connect your Anytone AT-5555 V6 to your computer, you will need a programming cable that has a USB connector on one end and a 6-pin connector on the other end. You can buy this cable from Anytone or other online stores. Plug the USB end of the cable into your computer and the 6-pin end into the back of your radio. Make sure your radio is turned off before connecting it.
Once you have connected your radio to your computer, you will need to install the driver for the programming cable. This driver should be included in the software package that you downloaded from Anytone or CHIRP. If not, you can download it from the Anytone website[^2^] or search for it online. Follow the instructions on how to install the driver for your operating system.
Programming Your Radio with Software 22
After you have installed the software and the driver, you are ready to program your radio with software 22. Launch the software and select your radio model from the drop-down menu. Then click on Read Data from Radio to download the current settings from your radio to your computer. You will see a progress bar showing the reading process.
Once you have read the data from your radio, you can edit it on your computer using the software interface. You can change various parameters such as frequency, power, mode, tone, scan, etc. You can also import or export data files from other radios or sources using the File menu. You can also use some advanced features such as 2TONE, 5TONE, MSK, etc.[^1^]
When you are done editing your data, you can upload it back to your radio by clicking on Write Data to Radio. You will see another progress bar showing the writing process. After that, you can disconnect your radio from your computer and turn it on. You should see your new settings applied to your radio.
Conclusion
The Anytone AT-5555 V6 is a great CB/HAM radio that can be programmed with software 22 to suit your needs and preferences. You can download and install the software from Anytone or CHIRP websites, connect your radio to your computer with a programming cable, and edit your data using the software interface. We hope this article has helped you learn how to program your Anytone AT-5555 V6 with software 22. 29c81ba772
https://www.blakeherrick.com/group/mysite-231-group/discussion/d2a773ca-17f7-4b82-8e2e-40ce93101e4f